Our files are designed for strength, flexibility and good looks in any office setting. In fact, the components have been tested to accept a 125-pound load, which exceeds ANSI/BIFMA X5.2-1989 standards for lateral files. 2 drawers; 18-20 gauge steel shell.

2 Drawer - 30-42 in. wide x 18 in. deep x 27 in. high.
3 Drawer - 30-42 in. wide x 18 in. deep x 40 in. high.
4 Drawer - 30-42 in. wide x 18 in. deep x 51 in. high.
5 Drawer - 30-42 in. wide x 18 in. deep x 64 in. high

Our files are designed for strength, flexibility and good looks in any office setting. In fact, the components have been tested to accept a 125-pound load, which exceeds ANSI/BIFMA X5.2-1989 standards for lateral files.
 

• 18-20 gauge steel shell
• Seamless lock and top with reinforced corners
• 20 gauge steel drawer fronts with full-width flush inset pulls and label holder
• Roll-out shelves with screw-mounted fronts to build drawers
• Roll-out shelf body slotted on 1 or 1-1/2 inch centers to accept dividers
• Notched shelf ends to accept hanging folder bars
• Two heavy-duty, three-section, ball-bearing suspensions on shelves
• High security, single bit locks with removable and interchangeable plugs and key alike option
• Electrostatically-applied epoxy powder coating to resist chemicals and scrapes

SAFETY: Information contained on peel-off label on cabinet fronts; permanent labels affixed to left side of each drawer. When first loading the files please remember to start with the bottom drawer.

INSTALLATION: Explained in Users Guide shipped with each file.

STABILITY: To insure your safety, we are now adding counter weights in all our lateral files to eliminate the danger of tipping when loaded.